Open main menu
TS-231.jpg

The QNAP NAS TS-231 forms the basis of our local network shares and backup

2x 2TB Western Digital "Red" drives in RAID 1 configuration = 1.8 TB storage

locally on the network, it uses DHCP, with two ethernet nics (dual-homed) Access it via your network share (at 192.168.1.4 or 192.168.1.5) or externally at http://cloud.equality-tech.com

Operating System

The QNAP uses an operating system called QTS (based on Linux and GPL) QTS 4.2.1

Administration

Under the covers, the QNAP is a Linux box, so if you want to reset someones password, you can just use the passwd command as usual.

NAS Report

Here is a script which generates a script, and then runs it. Not sure why it's not just a plain script, but hey it's a neat trick. If you want to just use the script it generates, see /tmp/nasreport after invoking this. cat ./nas_report.sh

#!/bin/sh
rm -f /tmp/nasreport
touch /tmp/nasreport
chmod +x /tmp/nasreport
cat <<EOF >>/tmp/nasreport
#!/bin/sh
#
# NAS Report by Patrick Wilson
# see: http://forum.qnap.com/viewtopic.php?f=185&t=82260#p366188
#
# 
echo "*********************"
echo "** QNAP NAS Report **"
echo "*********************"
echo " "
echo "NAS Model:      \$(getsysinfo model)"
echo "Firmware:       \$(getcfg system version) Build \$(getcfg system 'Build Number')"
echo "System Name:    \$(/bin/hostname)"
echo "Workgroup:      \$(getcfg system workgroup)"
echo "Base Directory: \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))"
echo "NAS IP address: \$(ifconfig \$(getcfg network 'Default GW Device') | grep addr: | awk '{ print \$2 }' | cut -d: -f2)"
echo " " 
echo "Default Gateway Device: \$(getcfg network 'Default GW Device')" 
echo " "
ifconfig \$(getcfg network 'Default GW Device') | grep -v HWaddr
echo " "
echo -n "DNS Nameserver(s):" 
cat /etc/resolv.conf | grep nameserver | cut -d' ' -f2
echo " "
echo " "
echo "HDD Information:"
echo " "
alpha='abcdefghijklmnopqrstuvwxyz'
drives=\$(getcfg Storage 'Disk Drive Number')
for ((i=1;i<=drives;++i)) ; do
   echo -n "HDD\$i -"
   if [ ! -b /dev/sd\${alpha:\$i-1:1} ] ; then
      echo "Drive absent"
   else
      hdparm -i /dev/sd\${alpha:\$i-1:1} | grep "Model"
      echo " "
      parted /dev/sd\${alpha:\$i-1:1} print
      echo " "
      /sbin/get_hd_smartinfo -d \$i
      echo " "
   fi
done
echo "Volume Status"
echo " "
mdadm -D /dev/md0 /dev/md1 2>/dev/null
echo " "
cat /proc/mdstat
echo " "
echo "Disk Space:"
echo " "
df -h | grep -v qpkg
echo " "
echo "Mount Status:" 
echo " "
mount | grep -v qpkg
echo " "
#echo "Contents of \$(dirname \$(getcfg -f /etc/config/smb.conf Public path)):"
#echo " "
#ls -lF \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))/
echo " "
echo "Windows Shares:" 
echo " "
for i in \$(grep \] /etc/config/smb.conf | sed 's/^\[//g' | sed 's/\]//g' | grep -v global) ;do 
   echo -n "\$i:"
   testparm -s -l --section-name="\$i" --parameter-name=path 2>/dev/null 
done
#echo " "
#echo "QNAP Media Scanner / Transcoder processes running: "
#echo " " 
#/bin/ps | grep medialibrary | grep -v grep
#echo " " 
#echo -n "MediaLibrary Configuration file: " 
#ls -alF /etc/config/medialibrary.conf
#echo " " 
#echo "/etc/config/medialibrary.conf:"
#cat /etc/config/medialibrary.conf
echo " "
echo "iTunes Music Store: \$(getcfg -f /etc/config/mt-daapd.conf general mp3_dir)"
echo " "
echo "Memory Information:" 
echo " "
free | grep -v cache:
echo " "
echo "NASReport completed on \$(date +'%Y-%m-%d %T') (\$0) "
echo " "
EOF
sleep 2
clear
/tmp/nasreport
#done

Utilities

The NAS is not a full linux box. It only comes with a limited subset of commands, and some of those are provided by BusyBox. To see the output below, just run the busybox command.

BusyBox v1.01 (2016.05.31-18:24+0000) multi-call binary

Usage: busybox [function] [arguments]...
   or: [function] [arguments]...

        BusyBox is a multi-call binary that combines many common Unix
        utilities into a single executable.  Most people will create a
        link to busybox for each function they wish to use and BusyBox
        will act like whatever it was invoked as!

Currently defined functions:
        [, addgroup, adduser, ash, awk, basename, bunzip2, busybox, bzcat, cat, chgrp, chmod, chown, chroot, chvt, clear, cmp, cp, crond, crontab, cut, date, dc, dd, deallocvt, delgroup, deluser, df, dirname, dmesg, dos2unix, du, echo, egrep, env, expr, false, fdisk, fgrep, find, free, getty, grep, gunzip, gzip, halt, head, hexdump, hostname, hwclock, id, ifconfig, init, insmod, install, ip, kill, killall, klogd, linuxrc, ln, logger, login, ls, lsmod, md5sum, mkdir, mknod, mktemp, modprobe, more, mount, mv, nameif, netstat, nslookup, openvt, passwd, pidof, ping, ping6, pivot_root, poweroff, ps, pwd, rdate, readlink, reboot, renice, reset, rm, rmdir, rmmod, route, sed, sh, sha1sum, sleep, sort, strings, swapoff, swapon, switch_root, sync, sysctl, syslogd, tail, tar, tee, telnet, test, tftp, time, top, touch, tr, traceroute, true, tty, umount, uname, uniq, unix2dos, unzip, uptime, usleep, vi, wc, wget, which, whoami, xargs, yes, zcat

There are also a number of commands which are NOT provided by busybox.

  • ls -al /mnt/HDA_ROOT/usr/bin |grep -v busybox
  • ls -al /mnt/HDA_ROOT/usr/sbin