Open main menu

Changes

12,702 bytes added ,  14:22, 16 February 2021
Add search hack
== Search ==
<code>git grep</code> only works on the current content of your working copy. To search through all revisions, you can use something like
<source lang="bash">
git rev-list --all | ( while read revision; do git grep -F 'wgAWSCredentials' $revision; done; )
</source>
 
== Ignore File Mode ==
Sometimes you have to temporarily change file modes (or some script might alter your working directory). Anyway, to ignore file mode changes temporarily, you can just add <code>-c core.fileMode=false</code> to your command. E.g.:
<source lang="bash">
git -c core.fileMode=false status
</source>
You can also put this into a repo or global config, but you probably shouldn't.
 
If you need to change filemodes back to the way they were in the repo, you can do something like
<source lang="bash">
git diff --summary | grep --color 'mode change 100755 => 100644' | cut -d' ' -f7 | xargs chmod +x
git diff --summary | grep --color 'mode change 100644 => 100755' | cut -d' ' -f7 | xargs chmod -x
</source>
 
== Working on a remote terminal ==
 
If you're working on a remote terminal and your repository get's complicated, but you don't have desktop tools like [[meld]] or [[gitk]] to look at it, you can copy the remote repo to your desktop with <code>rsync</code>, even if you have to jump through a bastion host with something like:
<source lang="bash">
rsync -e "ssh -t bastion ssh -A" -ravz centos@10.0.50.68:/opt/meza/ ./meza-es1/
</source>
If that complains about host-key verification, then simply do an SSH first to the host, accept the host key identity, and logout. Now the rsync will work because the host-key is already accepted as valid.
 
== Tracking remote branches ==
 
Checkout a specific branch from origin, and track it.
What if you enter <code>git checkout -b REL1_29</code> when you *should have entered* <code>git checkout -b REL1_29 origin/REL1_29</code>? J<s>ust tell git that you meant to track the branch in origin: <code>git branch --set-upstream-to=origin/REL1_29 REL1_29</code></s> Set upstream doesn't do what's intended here! You should delete the branch that you created as a 'copy'; and then checkout the branch correctly. To checkout the branch correctly, just IGNORE the <code>-b</code> flag altogether. If you ''do'' use the <code>-b</code> flag, then you ''must'' use the long form that references the remote branch to track. If you just do a '<code>git checkout foo</code>' and there exists the same branch upstream at <code>origin/foo</code> then git will checkout a new branch set to track the remote.
 
== Tracing in Status ==
 
Add <code>GIT_TRACE=1</code> to your command to see more of what's going on. (Note that there are no spaces and no semicolon.)
<source lang="bash">
GIT_TRACE=1 git status
</source>
 
== Just the facts ==
 
Want simple red/green diff lines?
See all the changes in color, but without any context lines, and without the leading +/-/<nowiki>[space]</nowiki>
</source>
== What is this miscellaneous file, and how does it compare to what's in my repo? ==
 
Say you've got a config file lying around (untracked) in your local working tree. It's not in your current project branch, but you know it's an important file. How does it compare to what's in the '''freephile''' remote, '''es128''' branch version of the file?
<source lang="bash">
git diff freephile/es128:config/core/MezaLocalExtensions.yml config/core/MezaLocalExtensions.yml
</source>
 
== How has this file changed over time? ==
 
While you can use gitk on your desktop, if you're on a headless server, you can ask <code>git log</code> to show you the '''patch''' for each commit: <code>git log -p path/to/file</code>
 
== Compare a file between branches ==
 
Do you think a particular file has changed between two separate feature branches (ea based off master)?
<source lang="bash">
# git diff branch1..branch2 -- path/to/file
git diff es128-rebased..get-to-know-meza -- manual/commands.md
</source>
 
== Add that forgotten file ==
You forgot to add a file to the last commit? Just add it to the index, and commit with <code>--amend</code>. Added a file that shouldn't be there? <code>git rm</code> it. If you leave off the -m (message) option in the new commit, it will let you re-use the last commit message. This lets you "undo the last commit" and redo it right. You usually do not want to amend a commit if you've already pushed it to other repos, but if it's just local <code>--amend</code> is awesome-sauce.
</source>
== Undo a commit == Sometimes a commit is just wrong or 'breaks the build' so to speak. If you really just want to '''undo''' a commit, then <source lang="bash"># view what changes were made in the last commitgit difftool HEAD~# reset --soft will undo the last commit, but leave the changes locally as 'modified' files that you can re-work or commit.git reset --soft HEAD~# reset --hard will undo the last commit, and discard any changes that were made in the commit. Your work tree will be identical to the way it was after the prior commit.git reset --hard HEAD~</source> Using <code>reset</code> you can even go backwards several commits if you want.  The entire internet tells you not to <code>reset</code> if you've already pushed. But if you're just pushing (from machine A: your desktop) to a remote (machine B: eg. GitHub) so that you can then pull those changes into another space (machine C: development/staging/production/other machine) you can push your changes with <code>--force</code>; and pull them from that other environment. It may be quicker and easier though to identify the SHA of the n-1 commit and then <code>reset</code> on machine C<source lang="bash">git log -n 4# find the commit SHA, and use it on machine Cgit reset --hard d89c004cfe4bd67838fb41c7a6644bb15feee5cc</source> Credit: there's a clear explanation at https://www.git-tower.com/learn/git/faq/undo-last-commit == Git Branch == * list the branches you have locally <code>git branch --list</code>* list the branches that are on remotes <code>git branch -r --list</code>* checkout a remote branch, setting the local one to track <code>git checkout -t freephile/patch-1</code>* git branch --merged (while on master) shows you branches which are fully contained in HEAD, and can be deleted.  == Comparing local to upstream == If you do a <code>git status</code> and it tells you that your (local) branch is behind the remote tracking branch, then maybe you want to look at what those changes are.<pre># On branch master# Your branch is behind 'freephile/master' by 6 commits, and can be fast-forwarded.# (use "git pull" to update your local branch)</pre>Tell git to fetch the branch named 'master' from the remote named 'origin'. Git fetch will not affect the files in your working directory; it does not try to merge changes like <code>git pull</code> does.<br /><code>git fetch origin master</code> When the remote branch is fetched, it can be referenced locally via FETCH_HEAD. Tell git to diff the working directory files against the FETCHed branch's HEAD and report the results in summary format.<br /><code>git diff --summary FETCH_HEAD</code> If you want to see changes to a specific file, for example myfile.js, skip the --summary option and reference the file you want (or tree). Note: paths (or pathspecs) should be separated from command options with a double dash (<code>--</code>)<br /><code>git diff FETCH_HEAD -- mydir/myfile.js</code> == Comparing Branches == What's in this old branch, not in my new branch (ignoring merges)?* git log oldbranch ^newbranch --no-merges* git log master..feature (everything on the feature branch that is not in master)* git log HEAD..freephile/master (everything in the remote 'freephile/master' that's not in HEAD locally)* git log origin/master..HEAD (everything in the local branch that you would push)* git log --left-right master...experiment (triple dot shows everything since the common ancestor) <ref>https://git-scm.com/book/en/v2/Git-Tools-Revision-Selection#Commit-Ranges</ref>  == Don't merge, Rebase! == Get familiar with how to rebase your work each day http://www.bitsnbites.eu/a-tidy-linear-git-history/ If you forget to pull before you commit some local changes, you might just be able to `git rebase` to pull and re-play your changes on top of the branch. == Delete local and remote merged branches == <source lang="bash">git branch --merged | egrep -v "(^\*|master|dev)" | xargs -I % echo 'git branch -d % ; git push --delete freephile % ;'</source>Using '''echo''' helps you look before you leap. '''%''' is the replacement string in <code>xargs</code>. Change '<code>echo</code>' to '<code>sh -c</code>' to execute. Does both local and remote prunes. == Git Log == What's the commit history? The [https://git-scm.com/docs/git-log man page for git log] is so big, it's a forest. There are examples in the book for [https://git-scm.com/book/en/v2/Git-Basics-Viewing-the-Commit-History viewing commit history]. For a quick cheatsheet, try these. <code>--stat</code> gives a nice view of what happened in the log.
<source lang="bash">
git log --stat
# try these other git log variatiations
git log --patch
git log -2
git log -p -2 # - p is the same as --patch
git log --pretty
git log --pretty=oneline
git log --pretty=short
git log --pretty=full
git log --pretty=fuller
git log --graph
git log --pretty=oneline --graph
git log --name-only
git log --name-status
git log --abbrev-commit
git log -S<string> # find when the number of instances of the string are added or deleted
git log -G<regex> # same with POSIX extended regex
git log -- filename # look for commits that touch filename
git log -p -- filename
git log --since 'last week'
git log --since 2017-01-01
</source>
== Tags ==
 
With git, you can just tag something with <code>git tag foo</code>. This produces a 'lightweight' tag <ref>[https://stackoverflow.com/questions/21031201/how-can-i-list-all-lightweight-tags how can I list all the lightweight tags]</ref>. Use "annotated tags" whenever you want to know '''when''' something was tagged and '''who''' did it. Pass an empty message if you really don't care or need extra annotation.
<source lang="bash">
git tag -am '' 'REL-1.0-alpha'
</source>
 
 
== [https://stackoverflow.com/questions/12921125/git-merge-branch-of-another-remote Git merge branch of another remote] ==
 
When using git between a local repository and a single 'origin' remote, it's a simple process to work locally and push things back up to origin. But, what if you have a separate remote repository... perhaps on GitHub, or a collaborator who has similar sources but not using your origin (so disconnected, and perhaps not even linked ancestrally like a fork). How do you add that other remote to your project and then pull in the code "they" have on top of yours? Here's an example of how we started with a repo from github and added a repo that we were developing privately. (The reality is that we were developing a repo privately; created a sibling version of the code at github; and then wanted to re-incorporate the changes of the github repo back into our private repo.)
<source lang="bash">
# start with one 'origin' remote
git clone https://github.com/freephile/qb.git
# add another remote that has similar code
git remote add private greg@eqt:/home/greg/src/ad.git
# check
git remote -v
# rename it for the host it came from
git remote rename private eqt
# pull our 'eqt' remote onto the master branch of the code we got from 'origin'
git pull eqt master
# But there are some unversioned files in the way (git complains)
# So, create a new 'dev' branch and stuff all the new things there (which we can either delete, or resume later)
git checkout -b dev
git add hosts package.json requirements.txt scripts/
git commit -m 'stashing some files into a dev branch'
git checkout master
# now we can merge again
git pull eqt master
# git complains about some merge conflicts (changes on both sides so it can't just do a fast-forward)
# edit those files to remove the conflict markers and get them the way you want them
git add install* launch.yml
# finish your merge by committing the result
git commit -m 'merged additional plays from eqt'
# and push upstream to 'origin'
git push
# and push to other remote 'eqt'
git push eqt
</source>
 
== Unbloat ==
 
https://stackoverflow.com/questions/3797907/how-to-remove-unused-objects-from-a-git-repository
 
<source lang="bash">
git -c gc.reflogExpire=0 -c gc.reflogExpireUnreachable=0 \
-c gc.rerereresolved=0 -c gc.rerereunresolved=0 \
-c gc.pruneExpire=now gc
</source>
 
== Put your project on GitHub ==
 
Been hacking away on a project and now it's time to unveil it? Here are the quick and easy steps to get your local repo into your GitHub account.
<source lang="bash">
# first make a "bare" clone
# from your server
git clone --bare greg@example.com:/var/www/baz.com/www/project
# or from a local directory
git clone --bare /tmp/project
# produces project.git directory
cd project.git
# push that to your new project (created via browser at GitHub.com)
git push --mirror https://github.com/USER/project.git
# go back to the original project folder
cd /tmp/project
# optionally remove local remotes that are no longer needed
git remote remove origin
# add GitHub as a remote named 'github' (assuming SSH key-based auth)
git remote add github git@github.com:USER/project.git
# pull in anything from 'upstream' (assuming that now GitHub is the canonical source)
git pull github master
# push any changes up; setting the new remote as the upstream for the 'master' branch
git push --set-upstream github master
# from now on you can just 'git push' from master
</source>
 
== Create a README from a webpage ==
 
Now create a fine README file using [[pandoc]] to convert your webpage to [[Markdown]]
<source lang="bash">
pandoc --standalone --read html https://freephile.org/barcode/index.html -o README.md
</source>
 
== Remember your password ==
I know how to configure my user and email, but how do I tell git to remember my password for repos that I'm interacting with?
The answer is credential helper
{{References}}
[[Category:Development]]
[[Category:Version Control]]