Difference between revisions of "QNAP"

From Freephile Wiki
Jump to navigation Jump to search
VisualWikitext
(link to product page)
(Ads nasreport)
Line 14: Line 14:
 
== Administration ==
 
== Administration ==
 
Under the covers, the QNAP is a Linux box, so if you want to reset someones password, you can just use the <code>passwd</code> command as usual.
 
Under the covers, the QNAP is a Linux box, so if you want to reset someones password, you can just use the <code>passwd</code> command as usual.
 +
 +
== NAS Report ==
 +
Here is a script which generates a script, and then runs it.  Not sure why it's not just a plain script, but hey it's a neat trick.  If you want to just use the script it generates, see /tmp/nasreport after invoking this.
 +
<code>cat ./nas_report.sh </code>
 +
<source lang="bash">
 +
#!/bin/sh
 +
rm -f /tmp/nasreport
 +
touch /tmp/nasreport
 +
chmod +x /tmp/nasreport
 +
cat <<EOF >>/tmp/nasreport
 +
#!/bin/sh
 +
#
 +
# NAS Report by Patrick Wilson
 +
# see: http://forum.qnap.com/viewtopic.php?f=185&t=82260#p366188
 +
#
 +
#
 +
echo "*********************"
 +
echo "** QNAP NAS Report **"
 +
echo "*********************"
 +
echo " "
 +
echo "NAS Model:      \$(getsysinfo model)"
 +
echo "Firmware:      \$(getcfg system version) Build \$(getcfg system 'Build Number')"
 +
echo "System Name:    \$(/bin/hostname)"
 +
echo "Workgroup:      \$(getcfg system workgroup)"
 +
echo "Base Directory: \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))"
 +
echo "NAS IP address: \$(ifconfig \$(getcfg network 'Default GW Device') | grep addr: | awk '{ print \$2 }' | cut -d: -f2)"
 +
echo " "
 +
echo "Default Gateway Device: \$(getcfg network 'Default GW Device')"
 +
echo " "
 +
ifconfig \$(getcfg network 'Default GW Device') | grep -v HWaddr
 +
echo " "
 +
echo -n "DNS Nameserver(s):"
 +
cat /etc/resolv.conf | grep nameserver | cut -d' ' -f2
 +
echo " "
 +
echo " "
 +
echo "HDD Information:"
 +
echo " "
 +
alpha='abcdefghijklmnopqrstuvwxyz'
 +
drives=\$(getcfg Storage 'Disk Drive Number')
 +
for ((i=1;i<=drives;++i)) ; do
 +
  echo -n "HDD\$i -"
 +
  if [ ! -b /dev/sd\${alpha:\$i-1:1} ] ; then
 +
      echo "Drive absent"
 +
  else
 +
      hdparm -i /dev/sd\${alpha:\$i-1:1} | grep "Model"
 +
      echo " "
 +
      parted /dev/sd\${alpha:\$i-1:1} print
 +
      echo " "
 +
      /sbin/get_hd_smartinfo -d \$i
 +
      echo " "
 +
  fi
 +
done
 +
echo "Volume Status"
 +
echo " "
 +
mdadm -D /dev/md0 /dev/md1 2>/dev/null
 +
echo " "
 +
cat /proc/mdstat
 +
echo " "
 +
echo "Disk Space:"
 +
echo " "
 +
df -h | grep -v qpkg
 +
echo " "
 +
echo "Mount Status:"
 +
echo " "
 +
mount | grep -v qpkg
 +
echo " "
 +
#echo "Contents of \$(dirname \$(getcfg -f /etc/config/smb.conf Public path)):"
 +
#echo " "
 +
#ls -lF \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))/
 +
echo " "
 +
echo "Windows Shares:"
 +
echo " "
 +
for i in \$(grep \] /etc/config/smb.conf | sed 's/^\[//g' | sed 's/\]//g' | grep -v global) ;do
 +
  echo -n "\$i:"
 +
  testparm -s -l --section-name="\$i" --parameter-name=path 2>/dev/null
 +
done
 +
#echo " "
 +
#echo "QNAP Media Scanner / Transcoder processes running: "
 +
#echo " "
 +
#/bin/ps | grep medialibrary | grep -v grep
 +
#echo " "
 +
#echo -n "MediaLibrary Configuration file: "
 +
#ls -alF /etc/config/medialibrary.conf
 +
#echo " "
 +
#echo "/etc/config/medialibrary.conf:"
 +
#cat /etc/config/medialibrary.conf
 +
echo " "
 +
echo "iTunes Music Store: \$(getcfg -f /etc/config/mt-daapd.conf general mp3_dir)"
 +
echo " "
 +
echo "Memory Information:"
 +
echo " "
 +
free | grep -v cache:
 +
echo " "
 +
echo "NASReport completed on \$(date +'%Y-%m-%d %T') (\$0) "
 +
echo " "
 +
EOF
 +
sleep 2
 +
clear
 +
/tmp/nasreport
 +
#done
 +
</source>
  
 
[[Category:Company]] [[Category:Cloud]] [[Category:Network]] [[Category:NAS]] [[Category:Storage]] [[Category:Server]] [[Category:Backups]]
 
[[Category:Company]] [[Category:Cloud]] [[Category:Network]] [[Category:NAS]] [[Category:Storage]] [[Category:Server]] [[Category:Backups]]

Revision as of 23:37, 27 July 2016

TS-231.jpg

The QNAP NAS TS-231 forms the basis of our local network shares and backup

2x 2TB Western Digital "Red" drives in RAID 1 configuration = 1.8 TB storage

locally on the network, it uses DHCP, with two ethernet nics (dual-homed) Access it via your network share (at 192.168.1.4 or 192.168.1.5) or externally at http://cloud.equality-tech.com

Operating System[edit | edit source]

The QNAP uses an operating system called QTS (based on Linux and GPL) QTS 4.2.1

Administration[edit | edit source]

Under the covers, the QNAP is a Linux box, so if you want to reset someones password, you can just use the passwd command as usual.

NAS Report[edit | edit source]

Here is a script which generates a script, and then runs it. Not sure why it's not just a plain script, but hey it's a neat trick. If you want to just use the script it generates, see /tmp/nasreport after invoking this. cat ./nas_report.sh 

#!/bin/sh
rm -f /tmp/nasreport
touch /tmp/nasreport
chmod +x /tmp/nasreport
cat <<EOF >>/tmp/nasreport
#!/bin/sh
#
# NAS Report by Patrick Wilson
# see: http://forum.qnap.com/viewtopic.php?f=185&t=82260#p366188
#
# 
echo "*********************"
echo "** QNAP NAS Report **"
echo "*********************"
echo " "
echo "NAS Model:      \$(getsysinfo model)"
echo "Firmware:       \$(getcfg system version) Build \$(getcfg system 'Build Number')"
echo "System Name:    \$(/bin/hostname)"
echo "Workgroup:      \$(getcfg system workgroup)"
echo "Base Directory: \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))"
echo "NAS IP address: \$(ifconfig \$(getcfg network 'Default GW Device') | grep addr: | awk '{ print \$2 }' | cut -d: -f2)"
echo " " 
echo "Default Gateway Device: \$(getcfg network 'Default GW Device')" 
echo " "
ifconfig \$(getcfg network 'Default GW Device') | grep -v HWaddr
echo " "
echo -n "DNS Nameserver(s):" 
cat /etc/resolv.conf | grep nameserver | cut -d' ' -f2
echo " "
echo " "
echo "HDD Information:"
echo " "
alpha='abcdefghijklmnopqrstuvwxyz'
drives=\$(getcfg Storage 'Disk Drive Number')
for ((i=1;i<=drives;++i)) ; do
   echo -n "HDD\$i -"
   if [ ! -b /dev/sd\${alpha:\$i-1:1} ] ; then
      echo "Drive absent"
   else
      hdparm -i /dev/sd\${alpha:\$i-1:1} | grep "Model"
      echo " "
      parted /dev/sd\${alpha:\$i-1:1} print
      echo " "
      /sbin/get_hd_smartinfo -d \$i
      echo " "
   fi
done
echo "Volume Status"
echo " "
mdadm -D /dev/md0 /dev/md1 2>/dev/null
echo " "
cat /proc/mdstat
echo " "
echo "Disk Space:"
echo " "
df -h | grep -v qpkg
echo " "
echo "Mount Status:" 
echo " "
mount | grep -v qpkg
echo " "
#echo "Contents of \$(dirname \$(getcfg -f /etc/config/smb.conf Public path)):"
#echo " "
#ls -lF \$(dirname \$(getcfg -f /etc/config/smb.conf Public path))/
echo " "
echo "Windows Shares:" 
echo " "
for i in \$(grep \] /etc/config/smb.conf | sed 's/^\[//g' | sed 's/\]//g' | grep -v global) ;do 
   echo -n "\$i:"
   testparm -s -l --section-name="\$i" --parameter-name=path 2>/dev/null 
done
#echo " "
#echo "QNAP Media Scanner / Transcoder processes running: "
#echo " " 
#/bin/ps | grep medialibrary | grep -v grep
#echo " " 
#echo -n "MediaLibrary Configuration file: " 
#ls -alF /etc/config/medialibrary.conf
#echo " " 
#echo "/etc/config/medialibrary.conf:"
#cat /etc/config/medialibrary.conf
echo " "
echo "iTunes Music Store: \$(getcfg -f /etc/config/mt-daapd.conf general mp3_dir)"
echo " "
echo "Memory Information:" 
echo " "
free | grep -v cache:
echo " "
echo "NASReport completed on \$(date +'%Y-%m-%d %T') (\$0) "
echo " "
EOF
sleep 2
clear
/tmp/nasreport
#done

General Public License = A sane copyright license

Internet Protocol. An IP Address is a host or device name in numeric form.

Domain Name System. An Named Host to IP Address lookup system

Retrieved from "https://wiki.freephile.org/wiki/index.php?title=QNAP&oldid=6875"