Honda ST1300A/rear shock preload

From Freephile Wiki
< Honda ST1300A
Revision as of 18:32, 6 May 2024 by Admin (talk | contribs) (Created page with "The [ Maintenance Items Needed for a New (old) Bike] document from the S...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Maintenance Items Needed for a New (old) Bike document from the ST-Owners forum says:

Check the rear shock preload adjuster.

While not described in the Honda

Service Manual, the preload adjuster is most likely low on fluid and is not working properly. After unscrewing the knob all the way, if resistance is not felt within two clicks, fluid needs to be added. This is discussed in several


Preload[edit | edit source]

Rebound and damping[edit | edit source]