class C network numbers.</ref>
**https://docs.aws.amazon.com/vpc/latest/userguide/subnet-sizing.html
**Solarwinds has an interactive (not obvious) calculator https://www.solarwinds.com/free-tools/advanced-subnet-calculator and there's a similar calculator at https://www.site24x7.com/tools/ipv4-subnetcalculator.html
*45. [HOL] Create a Custom VPC
**Sometimes when using the AWS console, they will give you the equivalent AWS CLI commands to execute the same action. e.g. <code>aws ec2 attach-internet-gateway --vpc-id "vpc-0a00177c33db94123" --internet-gateway-id "igw-0daed3800abd56791" --region us-east-1</code>
*46. VPC Routing Deep Dive
**Routing between "local" cloud resources and an identical local (private) IP address connected via VPG to on-premises data center
**Routing when you want all return traffic from the Internet to pass through a security appliance
*47. Security Groups and Network ACLs
**Security Groups can be applied to instances in any subnet
**SG has an implicit DENY
**Network ACLs are at the network level (subnet)
**Network ACLs are numbered, and processed in order, so an '''explicit''' DENY would be ignored (not reached) if an earlier ALLOW permitted the traffic.
*48. [HOL] Configure Security Groups and NACLs
*49. NAT Gateways and NAT Instances
**A NAT Gateway would be created in a '''public''' subnet, and be used to allow outbound traffic from instances on a private subnet (e.g. to download software and patches).
**The route for the NAT Gateway needs to be in the '''private''' subnet.
**A NAT Gateway is a managed service whereas a NAT Instance is your own managed instance. The managed is automatically scalable and offers some other advantages, but you'll pay for the privilege. A NAT instance can double as a bastion host (or "jump host" for SSH), but since you're managing it, you'll need to do the extra work for "features".
*50. [HOL] Private Subnet with NAT Gateway
*51. Using IPv6 in a VPC
**AWS assigns a /56 IPv6 address range to your VPC
**Subnets receive a /64 address range allowing 18 million trillion addresses.
**A hexadecimal pair (00 - FF) is assigned for each subnet, providing for 256/64 subnets e.g. 2406:da1c:f7b:ae00::/56
**You can have an "Egress-only" Internet Gateway to allow IPv6 traffic outbound but not inbound.
*52. [HOL] Configure IPv6
**test with <code>ping6</code> or <code>ping -6</code>
*53. VPC Peering
**enables routing using private IPv4 or IPv6 addresses.
**CIDR blocks cannot overlap - which is another argument against using IPv4 for anything
**Is not transitive, so each VPC must establish peering to every other VPC that you want to route to. IOW, you need to setup and manage the entire mesh of networking.
*54. [HOL] Configure VPC Peering
*55. VPC Endpoints
