Difference between revisions of "Video Editing"

Revision as of 16:59, 2 January 2005

I have a video camera and several tapes with movies on them. I have always intended to take the movies off the tapes as they were recorded, and transfer them to my PC. Once on the PC, I want to edit the movies (delete scenes, add transitions, etc.) I also want to use the PC for either permanent archival (since disk is relatively cheap), or transfer the movies to CD / DVD for permanent storage. Actually, this is the biggest goal of all: turning my home movies into something on CD or DVD that I can easily watch and share. Starting the New Year off right, I decided I would take the plunge and finally do it. Here then is my tale.

Let's face it, watching home movies using your video camera and a collection of tapes is not too easy, nor too fun. It should be a lot easier, like popping in a CD or DVD into the DVD player, then sitting back on the sofa with the remote control.

The equipment: Panasonic MiniDV camcorder with 1394 (firewire) port IEEE 1394 (firewire) card for PC IEEE 1394 cable PC with over 68 GB of free space and 756MB of RAM (On my Debian system running the KDE desktop, I can get this information through the KDE Info Center)

Debian packages added[edit | edit source]

coriander (version 1.0.0-pre3-2)
dvgrab (version 1.6deb-1)
ftplib3 (version 3.1-1-5)
gscanbus (version 0.7.1-5)
libdc1394-10 (version 0.9.5-1)

Coriander control IEEE1394 digital camera

Coriander is a GUI that lets you control all the features of an IEEE-1394 Digital Camera complying with the DC Specifications v1.04 or later (see [1]).

dvgrab Grab digital video data via IEEE1394 links

dvgrab receives audio and video data from a digital camcorder via an IEEE1394 (widely known as FireWire) link and stores them into one of several file formats. It features autosplit of long video sequences, and supports saving the data as raw frames, AVI type 1, AVI type 2, Quicktime DV, or a series of JPEG stills.

gscanbus scan IEEE1394 (firewire/i.link) bus

gscanbus is a little bus scanning, testing and topology visualizing tool for the Linux IEEE1394 subsystem, with some AV/C support, especially for controlling Camcorders and VCRs. It is intended as a debugging tool for IEEE1394 development, but can also be used to simply check your IEEE1394 setup on Linux. (see [2])

libdc1394 high level programming interface for IEEE1394 digital camera

libdc1394 is a library that is intended to provide a high level programming interface for application developers who wish to control IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specification (found at [3]). This package contains shared libraries.

libraw1394 library for direct access to IEEE 1394 bus (aka FireWire)

libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides direct access to the connected 1394 buses to user space. Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question.

libavc1394 control IEEE1394 audio/video devices

libavc1394 is a programming interface for the 1394 Trade Association AV/C (Audio/Video Control) Digital Interface Command Set. It allows you to remote control camcorders and similar devices connected to your computer via an IEEE1394 (aka Firewire) link. This package includes the libraries needed to run executables using libavc1394.

@@ Line 1: / Line 1: @@
-== Applications ==
+I have a video camera and several tapes with movies on them.  I have always intended to take the movies off the tapes as they were recorded, and transfer them to my PC.  Once on the PC, I want to edit the movies (delete scenes, add transitions, etc.) I also want to use the PC for either permanent archival (since disk is relatively cheap), or transfer the movies to CD / DVD for permanent storage.  Actually, this is the biggest goal of all: turning my home movies into something on CD or DVD that I can easily watch and share.  Starting the New Year off right, I decided I would take the plunge and finally do it.  Here then is my tale.
+Let's face it, watching home movies using your video camera and a collection of tapes is not too easy, nor too fun.  It should be a lot easier, like popping in a CD or DVD into the DVD player, then sitting back on the sofa with the remote control.
+The equipment:
+Panasonic MiniDV camcorder with 1394 (firewire) port
+IEEE 1394 (firewire) card for PC
+IEEE 1394 cable
+PC with over 68 GB of free space and 756MB of RAM (On my Debian system running the KDE desktop, I can get this information through the KDE Info Center)
-There are several fully professional "Non-Linear Video Editing" applications in the free software realm.  I've only briefly toyed with them so I can't tell you from personal experience how easy it might be to do a quick project.  But Blender, OpenShot and KDENLiVE are amazing free software applications.
+==Debian packages added==
+#coriander (version 1.0.0-pre3-2)
+#dvgrab (version 1.6deb-1)
+#ftplib3 (version 3.1-1-5)
+#gscanbus (version 0.7.1-5)
+#libdc1394-10 (version 0.9.5-1)
-=== Editing ===
+'''Coriander''' control IEEE1394 digital camera
-These are some of the free editing tools.  More can be found at https://directory.fsf.org/wiki/Category/Video
-; [https://www.blender.org/ Blender]
-: {{#ev:youtube|https://www.youtube.com/watch?v=pznQweUD9x0|300|right|Basic Video Editing in Blender|frame}}
-: is simply an awesome program.
-: It is used mostly for 3-d design and modelling, but it also is quite capable at video editing.
-: Blender works on both Windows and Linux. Lots of tutorials on YouTube (see right for example)
-; [http://www.openshot.org/features/ OpenShot]
-: {{#ev:youtube|https://www.youtube.com/watch?v=_0nEHxtTjk4|300|right|OpenShot 2.0 reaches beta|frame}}
-: is another Linux only NLVE, and might be more 'beginner friendly'
-; [http://ffmpeg.org/ FFmpeg] [[wp:FFmpeg]]
-: One of, if not ''the'' most useful tool in the land of multimedia is FFMPEG.
-; [http://www.transcoding.org/cgi-bin/transcode Transcode] [[wp:Transcode_(software)]]
-: tool is built using the libavcodec library of FFmpeg.
-; [http://www.avidemux.org/ Avidemux] [[wp:Avidemux]] ([http://www.avidemux.org/admWiki/index.php?title=Main_Page wiki])
-: Available in three user interfaces (GTK+, QT4 and cli) for all major operating systems.
-: Avidemux is a free video editor designed for simple cutting, filtering and encoding tasks. It's graphical user interface looks pretty similar to VirtualDub and most features known from VirtualDub are available too.
-: Avidemux natively supports a great number of file types, such as AVI, MPEG, VOB, TS, MP4, ASF, OGM, MKV and FLV. At the same time Avidemux natively supports a wide range of Video/Audio formats, including MPEG-1, MPEG-2, MPEG-4 ASP, H.264/AVC, DV, HuffYUV, MP3, AAC, AC-3 and Vorbis. Tasks can be automated using projects, job queue and powerful scripting capabilities. Video-DVD or (S)VCD compliant streams can be created with easy-to-use "Auto" wizards. Multi-threading is supported! See also: [http://forum.doom9.org/showthread.php?t=126164 FAQ] at doom9
-; [http://www.pitivi.org/ PiTiVi]
-: is a video editor designed to be user-friendly and powerful
-; [http://www.gopchop.org GOPchop]
-: is a "Graphical MPEG Clipper" - a Linux-based GUI program for removing sections from a video file with the minimum amount of disturbance to the stream.  It does this by writing specific "Group of Pictures" (GOP) sections to a new video file.  The GOPs will decode correctly and the gaps won't be noticed.
-; [http://handbrake.fr/ HandBrake] [[mw:HandBrake]]
-: is a software application that can convert MPEG video (including DVD-Video) into a MPEG-4 video file in .mp4, .avi, .ogm, or .mkv containers.
-; [http://kinodv.org/ kino] [[wp:Kino_(software)]]
-: Kino is great for working with the DV format and IEEE 1394 (firewire) interfaces
-; [http://kdenlive.org/ kdenlive]  [[wp:Kdenlive]]
-: A nice "pro-sumer" (hobbyist, close to professional needs)  tool.  Kdenlive has instructions on how to make and add a tutorial to their site, including how to create and upload desktop recordings onto vimeo.com  http://kdenlive.org/contribution-manual/how-make-video-tutorial {{#ev:youtube|https://www.youtube.com/watch?v=9kkaUd7nBKo|300|right|KDENLiVE|frame}} Currently only runs on Linux (but there are efforts to port it to Mac and Windows).
-; [http://www.heroinewarrior.com/cinelerra.php cinelerra] [[wp:Cinelerra]] https://cinelerra-cv.org/
-: is a significant project, aimed at the professional user.  It's both a NLVE and a compositing application.  There is a friendly fork called the Community Version (CV) as compared to the original Heroine Warrior (HW) version.
-=== Video Slideshows ===
+Coriander is a GUI that lets you control all the features of an
-; [http://ffdiaporama.tuxfamily.org/ ffDiaporama] : for making a slideshow video, and it's not bad. However, it simply refused to render my project with a 'encode error'. It is also outdated (last release in 2014) and doesn't install properly on newer Ubuntu.  The project itself is a fork of the even less maintained Diaporama
+IEEE-1394 Digital Camera complying with the DC Specifications v1.04 or
-; [http://imagination.sourceforge.net/ Imagination] : is a simple tool.  Last released in 2011, there is at least a note in 2017 that contributions are welcome.  The results weren't bad either.  But, I still like the power of OpenShot.
+later (see [http://www.1394ta.org]).
-=== Players ===
+'''dvgrab''' Grab digital video data via IEEE1394 links
-; [http://www.mplayerhq.hu/design7/info.html MPlayer] [[wp:MPlayer]]
-: is one of the most essential players in the Free Software world.  The project works in tandem with FFmpeg.  MPlayer software includes the '''Mencoder''' commandline tool
-; VLC
-: vlc is cross-platform and wonderful.  It even works on your phone.
+dvgrab receives audio and video data from a digital camcorder via an
+IEEE1394 (widely known as FireWire) link and stores them into one of
+several file formats. It features autosplit of long video sequences,
+and supports saving the data as raw frames, AVI type 1, AVI type 2,
+Quicktime DV, or a series of JPEG stills.
-=== Transcoding ===
+'''gscanbus''' scan IEEE1394 (firewire/i.link) bus
-http://programmer-art.org/projects/arista-transcoder
-== Mencoder and ffmpeg examples ==
+gscanbus is a little bus scanning, testing and topology visualizing
+tool for the Linux IEEE1394 subsystem, with some AV/C support,
+especially for controlling Camcorders and VCRs. It is intended as a
+debugging tool for IEEE1394 development, but can also be used to
+simply check your IEEE1394 setup on Linux. (see [http://gscanbus.berlios.de/])
-If you only want a 5-minute clip, the first thing to do would probably
+'''libdc1394''' high level programming interface for IEEE1394 digital camera
-be to throw away the other 55 minutes of video.  That should make all
-your files load much faster. :)
-You can extract the part you want with mplayer like this:
+libdc1394 is a library that is intended to provide a high level
-<source lang="bash">
+programming interface for application developers who wish to control
-$ mencoder -ovc copy -oac copy infile -ss 00:10:09.5 -endpos 00:05:00 -o outfile
+IEEE 1394 based cameras that conform to the 1394-based Digital Camera
-</source>
+Specification (found at [http://www.1394ta.org/]).  This package contains shared libraries.
-"-ovc" means "output video codec", "-oac" means "output audio codec",
-the "-ss" argument skips ahead to 10 minutes 9.5 seconds into the
-video, and "-endpos" tells mencoder to transcode exactly 5 minutes.
-"copy" is a special codec name that tells mplayer to just streamcopy
-the audio and video streams to output... essentially cutting out the
--minute segment that you want.
-This can also be done with ffmpeg:
+'''libraw1394''' library for direct access to IEEE 1394 bus (aka FireWire)
-<source lang="bash">
-$ ffmpeg -acodec copy -vcodec copy -itsoffset -00:10:09.5 -i infile -ss 00:10:09.5 -t 00:05:00 outfile
-</source>
-Note that the "-itsoffset" option must be specified to make sure that
-A/V timestamps synchronize, and that its value must be the negative of
-the "-ss" argument.
-Note that, for BOTH mencoder and ffmpeg, the order of command-line
+libraw1394 is the only supported interface to the kernel side raw1394
-options and arguments is not just significant, it's HIGHLY significant.
+of the Linux IEEE-1394 subsystem, which provides direct access to the
+connected 1394 buses to user space.  Through libraw1394/raw1394,
+applications can directly send to and receive from other nodes without
+requiring a kernel driver for the protocol in question.
-To transcode the video, specify the output codecs as the "vcodec" and
+'''libavc1394''' control IEEE1394 audio/video devices
-"acodec" sub-options to the libavcodec option (-lavcopts):
-<source lang="bash">
-$ mencoder -ovc lavc -oac lavc -lavcopts vcodec=mpeg4:acodec=ac3 infile -o outfile
-</source>
-Here, "lavc" means to use one of the libavcodec codecs, specified by
-the "vcodec" and "acodec" suboptions to the "-lavcopts" option (which
-specifies options for libavcodec).  mencoder has about a bazillion^2
-command line options, sub options, sub sub options, and can get quite
-confusing.  ffmpeg can also transcode audio and video streams from one
-codec to another.
-If you want to change the framerate of the video, you can use
+libavc1394 is a programming interface for the 1394 Trade Association AV/C
-something like this:
+(Audio/Video Control) Digital Interface Command Set. It allows you to
-<source lang="bash">
+remote control camcorders and similar devices connected to your computer
-$ mencoder -ofps 25 -oac copy -ovc copy -o outfile infile
+via an IEEE1394 (aka Firewire) link.  This package includes the libraries needed to run executables using
-</source>
+libavc1394.
-Note that, whenever you use "copy" as the codec, mplayer will copy the
-corresponding stream to the output unmodified.  That means it will ignore
-any filters set up to modify the copied stream.  This is a BIG gotcha.
-For example:
-<source lang="bash">
-$ mencoder -oac copy -ovc copy -af volume=10 -o outfile infile
-</source>
-WILL NOT DO what you probably want, because with "-oac copy" the
-"volume" audio filters (specified with "-af") will be ignored, and the
-audio in outfile will be at the SAME volume as the audio in infile.
-When capturing video in the US, you may also run into problems with
-video interlacing.  Fortunately, mencoder has deinterlacing video
-filters, for example "-vf pp=lb".
-== See Also ==
-[[Video Editing/My Story]]
-[[Category:Video]]
-[[Category:Multimedia]]
-[[Category:Howto]]
-[[Category:Applications]]

Difference between revisions of "Video Editing"

Revision as of 16:59, 2 January 2005

Debian packages added[edit | edit source]

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Freephile

eQuality Technology

Categories

Print/export

Tools