Honda ST1300A/rear shock preload

< Honda ST1300A

Revision as of 17:32, 6 May 2024 by Admin (talk | contribs) (Created page with "The [https://www.st-owners.com/forums/attachments/maintenance-items-needed-for-a-new-old-bike-13-pdf.285694/ Maintenance Items Needed for a New (old) Bike] document from the S...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Maintenance Items Needed for a New (old) Bike document from the ST-Owners forum says:

Check the rear shock preload adjuster.

While not described in the Honda
Service Manual, the preload adjuster is most likely low on fluid and is not working properly. After unscrewing the knob all the way, if resistance is not felt within two clicks, fluid needs to be added. This is discussed in several
threads.

Preload

light jack oil or fork oil
36 clicks 180 degrees per click
ST-Owners posts ST1300 preload fluid replacement
ST1300 - Rear suspension / Resetting the preload adjustor

Rebound and damping

Retrieved from "https://wiki.freephile.org/wiki/index.php?title=Honda_ST1300A/rear_shock_preload&oldid=10772"